IT2 series

description

the IT2 series represents the best solution for the integrity, flexibility and performance of installing liquid ring vacuum pumps with full or partial recirculation.
It consists of the following parts:

• liquid ring vacuum pump

• gas-liquid cyclone separator

• heat Exchanger

all devices are installed on a compact frame.

Function

the vacuum pump ejects the aspirated gas from the delivery port, as well as part of the service liquid present therein, which must be continuously replenished.
The air-liquid mixture is delivered to a cylindrical tank, where separation occurs: the gas comes out of the upper delivery port of the tank and is ready to be sent to the vacuum pump again.
During the suction and compression cycle, the vacuum pump transfers all the work in the form of heat to the working liquid. Of course, it should be cooled by a heat exchanger before recovery.

Technical Details

• used in chemical, pharmaceutical, food, wine, petrochemical and other industries.

• Vacuum/compression package with complete recovery of service water.

• Various service liquids may be used. Minimize the loss of service liquid.

• There are a variety of structural materials to choose from.

• No cooling water pollution.

• Close vacuum <10 mbar (with air ejector).

• The turnkey and compact packaging is environmentally friendly.

• Robust structure, high reliability.

• A variety of accessories are available to meet specific plant, process and maintenance needs. Special custom engineering systems can also be studied.

• The HydroSys series can also be used as a compressor, with a maximum pressure of 2 bar higher than the suction pressure, using tanks and accessories that meet current standards.

• The flow rate can reach 3500 m3/h and the lift can reach 33 mbar.